VProduct Details: Our hydraulic pump is designed with a 12V DC motor (Power: 1.6-3kw) and an 15-quart reservoir. The max relief pressure on A port (SAE#6) is 3200 PSI, and on B port (SAE#6) is 1500 PSI; the flow rate is 2 GPM, and it is a single-acting pump for power up and gravity down. VEasy to Use: This 12V hydraulic power unit has been fully assembled in advance.The wiring is simple and comes with operating instructions. One additional SAE#6 connector and one 15 ft remote control are included in the package. VReliable Quality: The dump trailer pump is made of sturdy metal; thus, the oil tank is not easy to crack or be damaged. As a power unit, this is a perfect replacement pump for remote hydraulic systems. Equipped with an overflow valve, it automatically releases when overpressure, safer and reliable. VRapid Start: With its powerful motor, this hydraulic electric pump is quick to start and quick to output oil; it can provide strong power for hydraulic systems like dump trailers, dump beds and is able to complete lifting in a short time. VWide Application: This power unit is widely used in stackers, small, and medium-sized lifting platforms. It is compatible with many dump trailers and movers and is a direct replacement for 12V DC remotely controlled hydraulic systems. The factory production of a hydraulic power unit when leaving the factory, the system pressure has been set.
If you want to change, the user according to the actual situation on their own through the knob to adjust the system pressure regualting valve, but no more than nominal pressure of the system. Carefully check the motor and the electromagnetic valve connection. In the installation and debugging for the first time, we must keep the internal fuel tank oil level, after a work cycle, oil tank should be made up, but not be too full. Electrical and electromagnetic valve connection should pay special attention to the supply characteristics ac, dc voltage and has the same sign. Ac power motor shell must be reliable grounding, forbidden ground operation.
The motor terminal box note waterprrof, moistureproof. Connection for the first time, inching motor check direction, from the motor back end, spin to counterclockwise. Absolutely forbidden motor reverse reverse rotation and oil-free idling. When the gas tank hydraulic oil must be filtered, filtration precision is not lower than 25 microns. Power unit can't filter the impurities inside the hydraulic cylinder.So the hydraulic cylinder internal must clean. Tubing must also be clean. We must keep the actuators, and pipeline cleaning, prevent dirt from entering the system. We must keep the tank oil level, after a work cycle, proper fill oil.
Such as pump suction air will cause the damage of pump and the damage of the seal. 100 hours after the running of hydraulic oil for the first time to join, change the new oil. After a year(1500 hours) to replace a new oil.Hydraulic iol viscosity for 22 and 46 was commonly/s. Working environment temperature high use hydraulic oil of high viscosity, low working environment with low viscosity hydraulic oil.
Displacement of hydraulic pump : 0.562-4.350GPM. Pump Action : Single acting Power-Up/ Gravity Down. Max relief pressure : on A port (SAE#6) is 3200 PSI, on B port (SAE#6) is 1500 PSI. Reservoir Capacity : 15 Quart Metal Reservoir.Mount : SAE # 6 Port, Horizontal mount. Wire : Hand held pendant with about 15 foot (4.5 m) removal cord and start solenoid. Single-Acting Power Unit : This single-acting hydraulic power unit has a 12V DC motor (Power:0.37-5.5kw) and a 8-quart metal reservoir; it has SAE#6 ports with 3200 PSI max relief setting on A and 1500 PSI on B port. The flow rate is 2GPM.
Convenient Design : Our hydraulic electric pump has been fully assembled. It comes with a hand-held remote control and 1 additional SAE#6 connector for replacement. The whole power unit is easy to wire and easy to operate. Quick Start&Lifting : With the powerful 12V DC electric motor, our hydraulic pump for dump trailers can start rapidly and provide quick oil output.
In addition, it can provide strong power that will lift heavy objects in a short period. Long Lasting : You can rely on the quality of this electric hydraulic pump as it is made of special-treated sturdy metal, and the whole structure has been reinforced.
It is also equipped with a powerful electric motor that you can use as often as you like. 1 X 8 Quart Single Acting Hydraulic Pump.
All items are dispatched from our warehouse in CA, NJ, AL. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that's why our customers keep coming back.
We never want our customers to wait for parts, we have plenty of parts available for every product. Please contact our customer service team immediately if. You changed your mind and wish to request a return.
Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
We will require a picture of the damaged part for verification. This item is in the category "Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Hydraulic Pumps". The seller is "best-homepro" and is located in this country: US.
This item can be shipped to United States.