GYB-630 Electric Hydraulic Pump 110V. Should be used first quick connector quick connector sets equippedwith hydraulic equipment connected.
When plugged in, press thepower switch to operate for some time, in the absence of pressure, the output hydraulic oil all the work, and the output hydraulic oil withincreasing load all the work up to 70Mpa, the need to buck their ownsupercharged, press the solenoid valve switch the pressure back tozero and hydraulic equipment, hydraulic oil back to the fuel tank. Remove the quick connector sets the end, unplug the power. Before using the pump, check the oil tank of the pump, make sure there has enough oil in the oil tank and higher than the oil-window.
Open the air-out screw before operating the pump. Inspect the oil pressure by the gauge. Change the hydraulic oil every 18 months. Filter the oil before changing the oil, #10 hydraulic oil is recommended. Handle the pump at 10-50.
Stop working once the motor is hotter to a higher temperature to protect the whole pump system. Keeping replacing the oil hose once any damaged or aging, the standard rated pressure of oil hose is 70Mpa. Replace the bearing and lubricate them according every 18 months.
Make inspection and replce the new O-rings. Add oil or change hydraulic oil. 1 Set of Electric Hydraulic Pump.
The item "110V/60HZ Single Acting Manual Valve Electric Hydraulic Pump 10000PSI GYB-630" is in sale since Sunday, April 23, 2017. This item is in the category "Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Hydraulic Pumps".
The seller is "sfeezglobal" and is located in Hayward, California. This item can be shipped to United States.