220V 70 MPa Electric Driven Hydraulic Pump with Single Acting Manual Valve

  
220V 70 MPa Electric Driven Hydraulic Pump with Single Acting Manual Valve. WATCH THIS ITEMEMAIL A FRIEND. This single acting electric oil pump has the advantages of small size, high pressure, light weight, simple structure and easy to use. This pump is equipped with pressure gauge so as to observe the pressure when the pump is working at any time. So that users can observe the work of changes at any time.

The pump can be used for a variety of hydraulic equipments. If the pump is equipped with other hydraulic tools, and it can work on several assignments, such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize the work efficiency.

0.52L/min - 2.5L/min. 488 in³ (8 liters / 8000 cc). Package size: 37×28×49cm / 14.5. When using, you should open the import and export of hand wheel, plug in the power supply, and connect the quick joint of pump to the quick joint of the equipped hydraulic tool.

Press the power switch to turn on the power, after the motor rotates for 1-2 minutes, you should close the oil hand wheel, and place the pump in the supercharged state. At this time, with the increase of the load the output hydraulic oil is of self pressurization to carry out the work until 70 Mpa. After the work is finished, you should open the oil hand wheel.

When the hydraulic oil is over, remove the quick joint cover, turn on the air release nut, and turn off the power supply. Easy to operate and high safety. Electromagnetic valve controlto pull back piston at any position. High and low speed for quick oil output. Turbine oil absorption to ensure max.

Overpressure unit of pressure safety valve to avoid over pressure damage or extremely pressured. High pressure is for driving piston, low pressure is for piston reset.

The pump uses the 15th hydraulic oil. Oil storage capacity must be above oil immersion lens. Each time refueling oil, you must use more than 80 mesh oil filter. It is needed to clean the fuel tank, and oil change period of six months.

Oil temperature ranges form 10 degrees Celsius to 50 degrees Celsius during working. Open the oil hand wheel before starting the electric pump, placed in unloading position. If the motor temperature is too high, you should stop it. After it is self-cooling, you can use it again. The pump has been adjusted before ex-factory. Readjustment must be carried out by means of a pressure gauge. High pressure oil pipe has been tested under the pressure of 105MPA before ex-factory. But the user should often check it because of hose aging. Generally used for six months, frequently used for three months. The bearing should be cleaned every six months, and you should add grease when the bearing is assembled.

1 x Electric Driven Hydraulic Pump. Our company is an emerging professional Cross-Border Electronic company. So far we have finished the assets re-organization and obtained wholesale financing. We guarantee every product is of high quality and durable utility compared to other factories becayse we choose the best-buys goods.

We are really appreciated if you would like to give us your valuable positive comment(s) after you receive our products, which is a huge encouragement for us to make our products and service better and better. Hope you will love our items. Any questions will be answered promptly, so please feel free to let me know your concern. At present, our company has warehouses in.

NO tariffs within EU countries. Transport time will range from 2 to 7 workdays according to your location. Please do check everything carefully when receiving the package. Failure to do so might result in damage to your own rights and interests. Pressure Washer Jet Wash Genuine 1450rpm Pump Solid Shaft 150 Bar 2200PSI 15L. 3/4HP Swimming Pool Pump Circulating Water Pump External Surface Water Filter.

Swimming Pool Circulation Pump 1.5 HP 380v/50Hz Swimming Pool Water Filter. Swimming Pool Pump 3hp External Surface Water Filter Fish Water Pump 380V. The item "220V 70 MPa Electric Driven Hydraulic Pump with Single Acting Manual Valve" is in sale since Thursday, July 11, 2019.

This item is in the category "Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pipe Tools\Other Pipe Tools". The seller is "enjoyfashionabletop" and is located in Prague. This item can be shipped worldwide.

1. Flow rate: 0.52L/min - 2.5L/min
2. Function: Single-acting, manual valve
3. Input voltage: 220V 50HZ
4. Motor power: 750W
5. Oil capacity: 488 in³ (8 liters / 8000 cc)
6. Country/Region of Manufacture: China
7. Weight: 59LBS(27kg)
8. Work pressure: 10152PSI (70Mpa)
9. Type: Hydraulic Pump
10. MPN: UK2019071163
11. Brand: Taishi
12. Applicable Regions: For Hydraulic Equipments